
Ball Type Newel Caps
Most of the caps on this page are available in to suit 90-95mm square posts. They can be provided in Oak, Pine, Yellow poplar Ash and Sapele. Also available as half caps.
If in stock usually
dispatched in 7 days.
Normally these are made to order and can take from 14-21days
Larger newel caps can be
made to order.
Please take a look at the cap measuring page before ordering
Ball Caps
| To Suit Post Size 90-95mm
|
To Suit Post Size 90-95mm
|
To Suit Post Size 90-95mm
|
|||||||||||||||||||||||||||||||||||||||||||||
|
BC4 |
BC5 |
||||||||||||||||||||||||||||||||||||||||||||||
| To Suit Post Size 90-95mm
|
To Suit Post Size 90-95mm
|
Can
be made to order in any diameter up to 300mm and normally with a 32mm diameter spigot
|
|||||||||||||||||||||||||||||||||||||||||||||
| To Suit Post Size 90-95mm
|
To Suit Post Size 90-95mm
|
To Suit Post Size 90 mm
|
|||||||||||||||||||||||||||||||||||||||||||||
BC11 |
|||||||||||||||||||||||||||||||||||||||||||||||
To Suit Post Size 90mm
| To Suit Post Size 90-95mm
| To Suit Post Size 90-95mm
| |||||||||||||||||||||||||||||||||||||||||||||
|
|
|
| All the caps pictured on this page with the exception of BC8 will have a spigot attached to suit a 32mm diameter hole. Other diameters of spigot can be requested, at an additional cost of 45 Pence per spigot. Any of these designs can be made to suit the size of your posts. |
Newel Drop Caps
Drop caps can be made to match all existing styles. Also available as half caps.
DC1 |
Awaiting photo DC2 |
Awaiting photo DC3 |
|||||||||||||||
|